Loading... Please wait...
Michigan's Largest Tool Store - The Tools You Need From The Brands You Trust
  • Saw Trax Varsity Series Vertical Panel Saw
  • Saw Trax Varsity Series Vertical Panel Saw
  • Saw Trax Varsity Series Vertical Panel Saw
  • Saw Trax Varsity Series Vertical Panel Saw
  • Saw Trax Varsity Series Vertical Panel Saw
  • Saw Trax Varsity Series Vertical Panel Saw
  • Saw Trax Varsity Series Vertical Panel Saw
  • Saw Trax Varsity Series Vertical Panel Saw
  • Saw Trax Varsity Series Vertical Panel Saw

Saw Trax C52VP 52 In Cross Cut Full Size Varsity Series Vertical Panel Saw

Availability: Special order item, ships manufacturer direct, usually within 10 to 14 business days
Shipping: $350.00 (Fixed shipping cost)

Product Description

Saw Trax C52VP 52 In Cross Cut Full Size Varsity Series Vertical Panel Saw

Custom Built To Order!  Takes approximately 14 Business Days To Ship.

A Full Size Panel Saw for Woodworking and Cabinet Making

The 1000 Series Vertical Panel Saw is for woodworkers, cabinet makers and other customers that need a vertical panel saw to precision cut sheets up to 1¾ inches thick.

Determine the Right Panel Saw

Standard Equipment: 

5' wide compact Frame
Welded steel frame, powder coated finish
Rip Cut Either Direction
Zinc plated, 1/8” wall, steel guide tubes
Top and bottom guide tube brackets ensure straight track
"Set & Forget" Accu-Square™ Alignment System
Accu-Fence™ Alignment System (Full Size Units)
Accu-Glide™ Steel Roller Bearing System
2 Carriage locks ensure no play when ripping or routing
Injected Molded Plastic Material Rollers
The most Material Support Rollers in its class
Uses Standard Size Blades (Found Everywhere)
Saw cord holder & Spring loaded saw counter balance

Varsity Series Standard Equipment:

7 1/4 inch Makita 5007N
industrial 15 amp saw
Trigger locking mechanism
Spinning saw insert plate
Dust collection hood with
viewing port
2.5" vacuum hose – 12 foot
Dust shroud brush
Vertical measuring systems
Dual rip gauge
Stop block with strip bar
2 horizontal measuring tapes
24 tooth carbide tipped blade

Vertical Panel Saws for Woodworking

This Vertical Panel Saw offers the precision, accuracy, ease of use and safety that sets Saw Trax panel saws apart. Features like real steel bearings on the carriage, a patented alignment system that never goes out of square, a dust collection system that actually collects the saw dust, a “quick change” carriage that allows you to use other cutting tools and selected options to provide you the equipment that most woodworkers request. Options like a pre-attached folding stand, wheels for the frame, vertical tapes with rip pointers, two horizontal tapes with a stop and stop extension bar, a saw blade shroud brush, a 12′ by 2.5″ dust hose with coupler for use with a vacuum and a spinning saw insert with attached 15 amp. Makita 5007F saw.

Shipment Receipt Guidelines:

All Saw Trax machines are crated in order to prevent damage. However, you are asked to fully inspect the machine before signing the shipment release form. All customers are encouraged to always write, “SUBJECT TO INSPECTION” directly on the bill of lading. Adding this statement protects Saw Trax, our company and the customer’s interests. If there is any visible damage to the packaging or machine, it must be fully documented on the bill of lading, images should be taken showing the extent of the damage. Contact us immediately to report a damaged shipment. Saw Trax Mfg., Inc. reserves the right to refuse to file claims against machines that are accepted without these guidelines being followed.

The Panel Saw for Woodworking

Vertical panel saws have been used to break down sheet goods because of their ease of use, speed of use, floor space efficiency and safety dividends. The 1000 Series panel saws are 10 feet wide for full support of you full size sheets. They come in 3 cross cutting frames for cutting 52″ (1052), 64″ 91064) and 76″ (1076). They will cut materials that are less than 1¾ inches with incredible accuracy.

The Carriage uses sealed steel bearings providing the user with smooth and precise cuts and a guide tube alignment system that will never shift or go out of square (Accu-Square). One of the most popular accessories for woodworking with our machine is the floating router insert (router not included) that turns your panel saw into a panel router in seconds!

The standard features on every Saw Trax panel saw is a quick release carriage that uses sealed steel bearings for movement, the Accu-Square alignment system that keeps your panel saw from going out of square, a welded powder coated steel frame, 11 gauge zinc plated steel guide tubes, material rollers, spring loaded retraction mechanism and a strip catch bracket between the rollers.

The 1000 series package also includes a 15 amp. Makita 5007F circular saw on a spinning saw insert, the best dust collection hook up in the industry: a blade dust shroud, saw dust cover, 12 ft. hose and hose coupler. Also included is a factory attached folding stand that is as easy to open and close as a ladder, transport wheels for mobility, one vertical and two horizontal measuring tapes, a stop (for accurate/repetitive cuts) with a bar for cutting strips and two rip pointers for rip cutting in either direction.

5 Feet Wide
Bearings on Carriage: Steel sealed bearings, 12 per carriage, tighter tolerances, easier movement

Alignment System: Patented Accu-Square system, Set & forget
Saw Replacement: Off the shelf, Limited down time
Carriage Locks: 2
Shipping: Crated
Instructions: Instructional CD video plays in computer and manual
Router Capable: Floating Router Insert available
Razor Knife Capable: Razor Knife Insert available
Rolling Shear Capable: Yes
Glass Cutter Capable: Yes
Cut Line Illuminated: Saw has 2 lights
Retraction Cable: Off-set
Viewing port in saw's dust cover: Yes
Material Rollers: 18, Never need adjustment
Cross & Rip Cut: 52" Cross Cut/Unlimited Rip
Saw Blade Type: 7 ¼" - Found everywhere
Depth of Cut: 1.75"
Saw: 15 Amp Makita 5007F
Saw Blade Included: Yes
Saw Blade Guard: Yes
Folding Stand: Folds like a ladder, Takes one person to move, Attached at factory, Uses ladder hinges and 10 lock nuts, 2 welded safety legs prevents saw collapse
Wheels for Frame: 5" - Weight off wheels while on stand
Dust Brush: Yes, sweeps cut on retraction
Stop Bar & Tapes: Use on either side. Included in package
Dust Collection: Includes dust brush, 12' hose (2.5 " diam.) and hose coupler