Loading... Please wait...
Michigan's Largest Tool Store - The Tools You Need From The Brands You Trust
  • Saw Trax 2076 76 In Cross Cut Full Size 2000 Series Vertical Panel Saw

Saw Trax 2076 76 In Cross Cut Full Size 2000 Series Vertical Panel Saw

$4,199.99
Quantity:
SKU: 2076
Availability: Special order item, ships manufacturer direct, usually within 10 to 14 business days
Shipping: $350.00 (Fixed shipping cost)


Product Description

Saw Trax 2076 76 In Cross Cut Full Size 2000 Series Vertical Panel Saw 

Custom Built To Order!  Takes approximately 14 Business Days To Ship.

When you have sawing to do, and A LOT of it, the 2000 series of vertical panel saws is the panel saw for you. This is the "tank" of the panel saw line with beefed up features for the most demanding jobs. Designed for industrial operations of cutting 50 or more sheets a week, the 2000 Series Vertical Panel Saw can be called on to get the job done. The hypoid Makita saw is basically a maintenance free worm drive saw that doesn't need to have the gear box oil changed.

Determine the Right Panel Saw


Standard Equipment: 

10' wide compact Frame
Welded steel frame, powder coated finish
Rip Cut Either Direction
Zinc plated, 1/8” wall, steel guide tubes
Top and bottom guide tube brackets ensure straight track
"Set & Forget" Accu-Square™ Alignment System
Accu-Fence™ Alignment System (Full Size Units)
Accu-Glide™ Steel Roller Bearing System
2 Carriage locks ensure no play when ripping or routing
Injected Molded Plastic Material Rollers
The most Material Support Rollers in its class
Uses Standard Size Blades (Found Everywhere)
Saw cord holder & Spring loaded saw counter balance


2000 Series Standard Equipment:

7-1/4 inch Worm drive 15 amp saw
Toggle power switch
Spinning saw insert plate
Dust collection hood
2.5" vacuum hose – 12 foot
Dust shroud brush
Vertical measuring systems
Dual rip gauge
Stop block with strip bar
2 horizontal measuring tapes
24 tooth carbide tipped blade
Steel covered material rollers

Vertical Panel Saws for Woodworking


This Vertical Panel Saw offers the precision, accuracy, ease of use and safety that sets Saw Trax panel saws apart. Features like real steel bearings on the carriage, a patented alignment system that never goes out of square, a dust collection system that actually collects the saw dust, a “quick change” carriage that allows you to use other cutting tools and selected options to provide you the equipment that most woodworkers request. Options like a pre-attached folding stand, wheels for the frame, vertical tapes with rip pointers, two horizontal tapes with a stop and stop extension bar, a saw blade shroud brush, a 12′ by 2.5″ dust hose with coupler for use with a vacuum and a spinning saw insert with attached 15 amp. Makita 5007F saw.

Shipment Receipt Guidelines:

All Saw Trax machines are crated in order to prevent damage. However, you are asked to fully inspect the machine before signing the shipment release form. All customers are encouraged to always write, “SUBJECT TO INSPECTION” directly on the bill of lading. Adding this statement protects Saw Trax, our company and the customer’s interests. If there is any visible damage to the packaging or machine, it must be fully documented on the bill of lading, images should be taken showing the extent of the damage. Contact us immediately to report a damaged shipment. Saw Trax Mfg., Inc. reserves the right to refuse to file claims against machines that are accepted without these guidelines being followed.

The Panel Saw for Woodworking

The 2000 series is the workhorse of our vertical panel saw line.  It uses steel sleeves over the plastic rollers (like a bullet proof vest) to prevent damage to the rollers from dropping heavy sheets of material on them. A push button Safety Switch is used on our modified Makita 7.25″ Hypoid saw (because the handle is removed).  The hypoid has replaced the old technology of the worm drive skill saw being used on other panel saws. The problem with the worm drive is that is uses oil in a gear box (like your car) to cool the gears and remove metal fragments.  The problem with it on a panel saw, the saw is always tilted at 75 degrees so the oil isn’t properly bathing/cooling the gears and very few people actually change the oil, let alone even know the oil needs to be changed periodically.  Kind of like driving your car and never changing the oil in it.  The Hypoid was designed to give the power of a worm drive but with different materials and gearing mesh cogs so there is no need for oil making it virtually maintenance free.

The 2000 series has the same accessory package as the Varsity and 1000 series including a factory attached folding stand, factory attached frame wheels, spinning insert, an outstanding dust collection package, rip pointers, left and right tapes with a stop that has a strip bar attached.

MPN: 2064