Multiquip DLW330X2 340A Welder Generator 10.5kW 120V 240V

SKU:
DLW330X2
$18,851.99
Condition:
New
Fixed Shipping Cost:
$1,200.00
Current Stock:
Availability:
Usually Ships Manufacturer Direct
Adding to cart… The item has been added

Multiquip DLW330X2 340A Welder Generator 10.5kW 120V 240V

SawStop requires sales tax to be collected in the states of CA, FL, MD, PA, MA, LA and NY, which is the responsibility of the customer.  If you are ordering from any of these states please contact us at 855-600-8665 and ask for the internet sales department.   The list of states for which taxes are required is subject to change at any time.  

This CC (Constant Curent) and CV (Constant Voltage) welder delivers up to 340 amps during single operation, or 200 amps to both outputs during dual operation. As a generator, this unit provides up to 10.5 kW of clean, 120/240 AC power. A digital panel display provides both amperage/voltage and troubleshooting information to the operator(s). Smart Stick, E-Mode, Arc Force are just some of the features of the DLW330X2 from Multiquip.

Specs:

Unit Specifications:
DC Voltage CC: Single 31.2V, Dual 26.6 V CV: Single 28V, Dual 22.3 V
DC Current CC: Single 280, Dual 165 A CV: Single 280, Dual 165 A
Current Range Single 70-340, Dual 35-200 A
Max Duty Cycle
w/ Full Amps Availible 100% @Single 280, Dual 165 A
Welding Processes SMAW
FCAW
MGAW
GTAW
ACAC
Fuel Tank Capacity 9.5 gal 36 L
Fuel Consumption:
at Rated Load: 1.1 gph

Generator Specifications:
AC Power Output:
(Single Phase): 10.5 kW
Cycle: 60 Hz
Voltage: 120/240 V
Amperage: 87.6/43.8 A
Voltage Regulation: 1.5 %
Receptacles: NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A
NEMA L6-30R 250V Twist-Lock 30A
CS-6369 125/250VAC Twist-Lock 50A
**Optional TRLR-MPXF trailer has a built in 28 gal. fuel cell

Dimensions & Weights:
Overall Length: 50.78 in 1290 mm
Overall Width: 26.77 in 680 mm
Overall Height: 33.07 in 840 mm
Shipping Dimensions: 50.78 x 26.77 x 33.07 in 1290 x 680 x 840 mm
Operating Weight: 983 lb 446 kg
Shipping Weight: 892.87 lb 405 kg

Notice: Features and equipment specifications are subject to change without notice.


Features:

  • Delivers up to 340 amps as a welder with the convenience of 10.5 kW of AC power as a generator
  • Dual operator output ability
  • Can draw simultaneous AC power while welding
  • Amazing voltage regulation @ 1.5% (+/-)
  • Tier 4 final Kubota diesel - Model D902
  • Arc Force control allows the operator to fine tune DC current during low voltage welding conditions which helps in preventing electrodes froms sticking during short arc length welding
  • Smooth arc characteristics and more consistent, quality weld penetration
  • E-mode improves fuel efficiency by allowing one operator to weld up to 200 amps while the engine maintains idle speeds. Two operators can also use this feature when the total amperage between both outputs does not exceed 200 amps
  • Smart Stick function automatically shuts the engine down during periods of no load. The operator only needs to tap the welding rod to the grounded work for the engine to restart, making restarts while in the rafters or hanging from the side of a skyscraper a breeze
  • SMAW, FCAW, GMAW, GTAW and ACAC welding processes
  • Sound attenuated cabinet reduces noise output to 68 dBA @ 23'
  • Full panel GFCI protection - OSHA and NEC compliant

MPN: DLW330X2 

UPC Number: DLW330X2