Lamello 101402DS Zeta P2 System with Diamond Tipped Cutter with Systainer

Fixed Shipping Cost:
Current Stock:

Lamello 101402S Zeta P2 System with Diamond Tipped Cutter with Systainer

The Zeta P2 is the profile biscuit joiner for P-System anchorage, and the Clamex P connector range in particular, and is used to connect wood materials.

The integrated vertical mechanical drive on the cutting spindle of the Zeta P2 is the centre-piece of this profile biscuit joiner. During the cutting process, the vertical mechanical drive automatically performs a vertical movement to create the profile groove. All P-System fittings are then manually inserted into this groove, ensuring a fast form-locking anchorage.

The Zeta P2 can cut P-System grooves for connecting fittings with varying installation depths simply by turning the P-System depth adjuster, thus removing the need to change cutters.

The vertical movement for the profile groove is triggered automatically when the maximum cutting depth is reached and requires just a fraction of a second. The vertical mechanical drive combines process security and reliability with a low-wear, fully mechanical construction.

The Zeta P2 can also be employed as a standard biscuit joiner for original biscuits by simply deactivating the profile groove function and changing to a 4mm blade.


  • Zeta P2
  • P-System cutter, diamond tipped For cutting the P-System groove in wood composite materials
  • Stop square
  • Suction stubs 23 + 36 mm
  • Angle disc
  • Spacer 2 mm
  • Spacer 4 mm
  • Tool set
  • P-System drill jig incl. drill

Voltage (V): 230 V
Power (W): 1050 W

Speed (U/min): 9'000 minˉ¹
Teeth: Z3

Cutting depth max: 20 mm