Delta 31-735B 6 inch Belt / 12 inch Disc Sander Finishing Machine

Delta 31-735B 6 inch Belt / 12 inch Disc Sander Finishing Machine

Features: Delta 31-735B 6 inch Belt / 12 inch Disc Sander Finishing Machine
Integrated mobile base for ease of mobility
Large tables are scientifically ribbed to prevent distortion

Handles 90 to 95% of your finishing operations

4" dust port can be used with the micron bag provided or can be attached to a standard 4" dust collection system and built-in dust collector fan that collects dust from the body of the machine and exhausts into the bag. 5 micron bag provided but is not intended for metal dust collection, but is for wood sanding only

The right speeds make it well suited for both metal and wood shops

Belt operates at any angle vertically, horizontally or any degree in between

Furnished with sliding pivot pin for circle sanding

**3 phase electricals will be supplied wired for 230V, unless 460V is specified. Power cord and plug supplied for single phase only. Motors and motor controls may be ordered unmounted

The 31-735B includes 1-1/2 HP, 200-230/460V, 60 Hz, 3,450 RPM, three phase TEFC motor with 24V push-button station, magnetic starter, transformer, 3-leg overload protection (LVC), (2) tilting tables, 4-1/2" arbor pulley, guard for arbor pulley, V-belt, 80-grit aluminum oxide belt, 50-grit aluminum oxide disc.

*Ships via LTL Freight (18 wheeler)
*Freight charges will be added at check-out

Specifications: Delta 31-735B 6 inch Belt / 12 inch Disc Sander Finishing Machine
Motor: 3 Phase, 1-1/2 HP, 200-230/460V (wired 200-230V), 60 Hz, 3,450 RPM
Abrasive Belt Size: 6" x 48
Speeds: Belt speed: 3,000 SFPM; Disc Speed: 2,100 SFPM
Table Size: Belt Table: 15" x 7-1/2"; Disc Table: 16-1/2" x 12
Miter Gauge Groove: 3/8" x 3/4"
Table Tilt: Belt: Tilts 45° down and 20° up; Disc: Tilts 45° down and up 20
Dust Port Diameter: 4
Width: 35
Length: 21
Height: 58
Weight: 365
Shipping Weight: 433