$1,749.99 $1,499.00

Bosch GTS1041A-09 10 Inch REAXX Jobsite Table Saw, With Active Response Technology, Gravity-Rise And Wheeled Stand

Now through Dec. 31, 2016, buy this Bosch GTS1041A-09 Jobsite Table Saw, and get a free DDS183-02 18V Compact Tough Drill/Driver (using mail-in rebate with purchase, below)


Arbor: 5/8"-11
Amperage: 15.0
Dimensions: 15.5 X 32 X 29.75 (including rear out feed in stored position)
No Load RPM: 3,650
Voltage: 110V - 120V
Blade Diameter: 10.0
Bevel Angle Range: -2° to 47°
Depth of Cut at 90 Deg.    3-1/8"
Depth of Cut at 45 Deg.    2-1/4"
Weight: 133.0lb


(1) Gravity-Rise™ Wheeled Stand
(1) Rear Outfeed Support
(1) 10 In. 40-Tooth Saw Blade
(1) Dual-Activation Cartridge
(1) Miter Gauge
(1) Rip Fence
(1) Barrier-Guard Device
(1) Anti-Kickback Pawls
(1) Push Stick
(1) Dual-Activation Cartridge Wrench
(1) Blade Wrench
(1) Hex Wrench
(1) Throat Plate Kit


• Active Response Technology™ – mitigates injury to user in case of blade contact, dropping the blade under the table with no blade damage
• Easy system reset – takes less than 60 seconds after blade drop, with no damage to the blade
• Dual-activation cartridge unit – two single-shot cylinders for two separate activations with each cartridge
• Portability – works seamlessly with the included Gravity-Rise™ Wheeled Stand for easy jobsite mobility, with single-action setup and take down
• Smart Guard System – riving knife and anti-kickback pawls provide protection when a kickback occurs, while the overhead guard provides a barrier helping to deter blade contact
• Powerful 15-amp 4.0-hp max motor – delivers 3,650 rpm and the power required for ripping in fine and rough carpentry materials, including standard 10 In. blade and dado applications
• Enhanced SquareLock™ rip fence – engineered for enhanced clamping and trueness with precision improvements for pre-squaring prior to locking
• Large cast aluminum top – provides increased work space and material support with a 25 In. ripping capacity
• Rear outfeed – hardened metal saw extension extends 18 In. and retracts for compact storage
• Onboard System Control – easy-to-understand saw status with intuitive LED lighted display
• Phone app – communicates information from control system to NFC-enabled phone, including number of system activations, servicing needs, access to instructions and other information
• Constant Response™ circuitry – to maintain speed under load and overload protection
• Soft-start circuitry – manages the intensity of motor start-up and minimizes the likelihood of tripping circuit breaker
• Onboard storage – access to all included parts, with additional cartridge storage, manual and system reset instructions
• Arbor lock – allows for easy blade changes with arbor lock and blade wrench located onboard
• Easy blade adjustment – located on top of table near throat plate, direct accessibility for easy blade parallel adjustment
• Convenient toolless throat plate lock – locks throat plate quickly and makes removal and reinstallation easy
• T-slot miter gauge combined with T-slot rail – allows for better control and support during miter gauge applications
• Durable sub base – increases tool life by handling tough jobsite conditions

MPN: GTS1041A-09

UPC Number: GTS1041A-09

Current Stock:
In Store Pickup Only
Bosch TS1020 Dual-Activation Cartridge
Bosch TS1006 Dado/Zero-Clearance Insert Plate
Bosch TS1008 Left-Sice Extension Support