Loading... Please wait...
  • Baileigh MH-37HD Power Hammer
  • Product image is only a representation, actual product appearance may differ slightly
  • Image 3
  • Product image is only a representation, actual product appearance may differ slightly
  • Product image is only a representation, actual product appearance may differ slightly
  • Image 6
  • Product image is only a representation, actual product appearance may differ slightly
  • Product image is only a representation, actual product appearance may differ slightly
  • Product image is only a representation, actual product appearance may differ slightly
  • Product image is only a representation, actual product appearance may differ slightly

Baileigh MH-37HD Power Hammer

Call (855) 600-8665 for price
Quantity:
SKU: MH-37HD
Availability: Call us, we will meet or beat any competitors price.
Shipping: Free Shipping


Product Description

Baileigh MH-37HD Power Hammer

The MH-37HD power hammer from Baileigh Industrial takes metal shaping to new heights. This monster is truly a do it all machine. We have taken all the knowledge we have gathered from the MH-19 and uped the capacities. The MH in MH-37HD stands for multi-hammer because if does multiple things, but unlike other combination machines that you see, the MH-37HD does them better than all of the stand alone machines. There truly is nothing that this machine can’t do. The MH-37HD power hammer is a 220 volt Three phase machine has the ability to transform itself from a rigid style like a Pullmax® style machine, to a spring slapping style like a Yoder® style machine.

When operating in the rigid mode, there is no "give" between the die heads. Used for short stroke shaping, flanging. Tooling designs and profiles are endless, but some of the options are mechanical shrinking, stretching dies, flanging dies, and louvers.
The spring setup with "Throw the die" causing a dead blow hammering effect. When in this mode the total amount of pressure applied when the dies hit the metal is increase exponentially. This mode would be used for aggressive shrinking and planishing, many different tooling profiles can be used.

The MH-37HD uses an inverter to obtain various speeds for operation. Speeds range from 0 to 1500 beats per minute, speed is adjusted one of two ways; either with the operator controlled foot pedal or on the operator panel where he/she can lock in their speed. Another key feature of the MH-37HD power hammer is “on the fly” stroke adjustments. These stroke adjustments range from 0.1” to .750”. Contact a Baileigh Industrial representative for more information.

Features:

Variable foot speed control with adjustable limit
Capacity (rated by shrinking ability) 1/8 Steel / 1/4" Soft Aluminum
Replaceable main hammering springs
Power hammer mode and rigid mode via shear pin
Quick release die changes
Quick release lower die anvil
Work light

Included tooling:

Large shrink die set
lat top master die
1.0 X 6.0 Plannish die
36.0R Die
24.0R Die
12.0R Die
Linear stretch die

Specifications:

Item Number MH-37HD
Country of Manufacture United States
Motor Hp 5 HP
Speed 0 – 1500 beats / minute
Mild Steel Capacity 16 ga.
Tooling Height Adjustment 2"
Throat Depth 37"
Capacity (Mild Steel) .125"
Aluminum Capacity .250" Soft
Length Of Stroke Adj 0.1" - 0.75"
Power 220V / 3-phase
Shipping Weight 6000 lbs.
Shipping Dimensions 72" x 60" x 90"
* specifications subject to change without notice.

Product Videos

Power Hammer Adjustment: Old vs. New Machines 03:13

Mark Gerisch offers the only complete course on POWER HAMMERS in the US using modern hammers. Here he shows us how easy it is to adjust a Baileigh RMD hammer versus the old legacy hammers. I highly recommend Mark's courses! Contact him at: www.aametalshaping.com

  • Power Hammer A...
    Mark Gerisch offers the only complete course on POWER HAMMERS ...
  • Baileigh Indus...
    Mark Gerish demonstrates the power of the Baileigh Industrial ...